Power supply: 15-24V 1A
Input pressure: Min 4.5bar max 8bar
Pressure setting range: 1.5 to 6 bar
Adjustable time: 0 to 9999.999s
Time resolution: 0.001s
Weight: 4.8kg
Dimensions: 260mm x 185mm x 240mm
Connection hoses: Standard 6mm
Operating temperature: -20 ° C to 60 ° C
Configurable programs: 8 separately adjustable
External direct control: Yes preparation for robotics
Modes: Hand / Semi / Auto
Volume flow: Adjustable from 0 to 100%



The dispenseCUBE is a pneumatic Dosing system with the help of an external compressed air source Adhesives can dose. Dosing the Amount of glue takes place primarily via a Time control . The system has eight independent program memories in which different times can be stored. The system also has its own vacuum generator, which minimizes or completely prevents the adhesive from running on (retraction).

This is highly dependent on the adhesive used and the one used Dispensing tool . The system is controlled via the control panel. In addition to the Relief for direct service an external switch (foot or hand switch) can be connected. The system also offers the option of being started, controlled and switched off via an external control device (e.g. PLC, robot, etc.).

In addition to the time control, the amount to be applied can be varied manually via the pressure and flow rate of the compressed air in order to achieve the widest possible range of adhesives and Dosing applications to be able to cover.



  • as adhesive solutions e.K.
    Robert-Bosch-Straße 32
    63303 Dreieich

  • Lilienthalstraße 25
    85399 Hallbergmoos

  • +49 6103 907 99 83
  • Montag - Freitag:
    8:00 - 17:00 Uhr

Neueste Beiträge

Go to Top